100% Made in India

Use code Ruhe5 to get 5% additional discount on orders above 10,000 (Prepaid Only)

30 Days Easy Returns and Exchange

Waste Coupling

(9 products)
View as

What is a Waste Coupling?

A waste coupling for a basin refers to a component that forms a part of the plumbing system. It's essentially a drain connector that facilitates the flow of wastewater from the basin to the drainage system. This component is particularly important in avoiding leakages and managing the efficient disposal of water.

Where Can a Waste Coupling Drainer be Installed?

A waste coupling drainer can be installed in a variety of locations, depending on where a drainage connection is needed. Some common examples include:

  • - Sinks: Both kitchen and bathroom sinks typically require waste coupling drainers.
  • - Basins: These include washbasins in bathrooms or other types of basins used in various settings, like laundry rooms.
  • - Bathtubs and Showers: These bathroom fittings also need efficient waste coupling to drain used water.
  • - Toilets: The toilet bowl needs to connect to the main sewage system, which is done via a specific type of waste coupling system.

What Is the Difference Between a Full-Thread and a Half-Thread Waste Coupling?

In terms of full-thread and half-thread waste coupling, these terms relate to the nature of the threading on the waste coupling component. Threading refers to the raised helical ridges around the edge of a pipe or fitting.

  • - Full-Thread Waste Coupling: This type of waste coupling has threads running along the entire length of the coupling body. It tends to provide a very secure fit and is less likely to leak. It's particularly useful where the connection needs to withstand significant pressure, or where the fitting is expected to endure a lot of wear and tear.
  • - Half-Thread Waste Coupling: In contrast, a half-thread waste coupling has threads that only run halfway down the coupling body. This is sometimes more than adequate for situations where the pressures are lower, or where the coupling doesn't have to withstand a lot of wear and tear.

What Are the Different Colors Available For Waste Coupling?

  • - Black Matte
  • - Rose Gold/ Antique Copper
  • - Stunning Silver
  • - Yellow Gold

What is a Pop-Up Waste Coupling?

A pop-up waste coupling is a type of sink drain that uses a lever mechanism to open and close the drain. When the lever is activated, the drain "pops up" to allow water to be drained from the basin, and when the lever is deactivated, the drain closes to keep water in the wash basin.

The pop-up waste coupling mechanism is typically controlled by a lever or knob located at or near the faucet. When you lift or push down this lever, it activates a rod which is connected to the sink stopper inside the drain, causing it to rise or drop.

What Are the Benefits of a Pop-Up Waste Drainer?

  • - Ease of Use: You can easily control the drainage of water without having to manually remove a stopper from the drain.
  • - Stylish and Modern: Pop-up waste couplings are often considered more visually appealing and modern in design than traditional plug-and-chain setups.
  • - No Lost Stoppers: Since the stopper is part of the drain assembly, you don't have to worry about misplacing it.

Why Choose Ruhe’s Waste Couplings?

  • - 1 Year Warranty
  • - Sustainable & Authentic Material
  • - 100% made in India
  • - 30 Days Easy Return & Exchange

Compare /8

Download App Kitchen & Bathroom Fittings in your Pocket