Ruhe Bathroom Diverters: Concealed Diverters and Thermostatic Diverters
A bathroom diverter controls the water to your shower area from one place. It mixes hot and cold water and sends it to the outlet you choose: the bath spout, the overhead shower or the hand shower. Ruhe diverters are concealed: the brass body sits inside the wall, and only the handle, knob and face plate show. Ruhe sells single lever diverters as full sets, bodies and upper parts, the Flux 3-function diverter, and Aurora thermostatic diverters that hold the water at the temperature you set.
Quick Guide
| If you want… | Choose | Start with |
|---|---|---|
| Hot and cold water to a spout and an overhead shower | 2-inlet diverter full set | Kara 2-Inlet Full Set |
| A stronger flow when your overhead tank is low | 2-inlet high-flow diverter full set | Kara High-Flow Full Set |
| Outlets switched by a push button | 2-inlet push-button diverter full set | Pavo Push-Button Full Set |
| A 3-inlet (5-way) diverter | 3-inlet diverter full set | Elixir 3-Inlet Full Set |
| Three outlets from one diverter | 3-function diverter | Flux |
| Water that stays at the temperature you set | Thermostatic diverter | Aurora 3-Function |
| To replace only the handle and plate | Diverter upper part | Diverter Upper Parts |
Full Set, Body or Upper Part?
- Full set: the concealed body and the upper part together. Buy this for a new bathroom.
- Diverter body: the brass valve that goes into the wall while the plumbing is being done.
- Upper part: the handle, knob and face plate, fitted after tiling. Buy it alone to replace a worn one, or if the body is already in the wall. Upper parts for 2-inlet diverters and for 2-inlet high-flow and 3-inlet diverters are different, so pick the one that matches your body.
Types of Diverters
2-Inlet Single Lever Diverters
A 2-inlet diverter takes hot water from the geyser and cold water from the tank. The big handle turns the water on and sets the temperature, and the knob sends water to the overhead shower or the spout. Full sets come in Demure, Eclipse, Elixir, Kara, Pavo and Pristine designs, in Chrome.
High-Flow Diverters
High-flow diverters use a bigger cartridge than regular 2-inlet diverters and give a stronger flow even when your overhead tank is low.
Push-Button Diverters
These switch between outlets with a push button instead of a turning knob.
Aurora Thermostatic Diverters
Aurora diverters have a Vernet thermostatic cartridge that holds the water at the temperature you set, with a 38°C safety stop. If the cold water supply fails, the valve shuts off the hot water automatically. Each outlet has its own push button, so you can run one shower or several together. Aurora comes in 3, 4 and 5 function models, in Chrome, Matt Black and Yellow Gold. It needs a wall depth of 80 to 90 mm including tile, and water pressure of about 40 PSI (2.8 bar), so most homes need a pressure pump.
Diverter or Wall Mixer?
A diverter sits inside the wall, so only the handle, knob and plate show; a wall mixer sits on the wall. A diverter looks cleaner but must be fitted while the wall is open. If your bathroom is already tiled, a wall mixer is easier.
Diverter Price
Prices on ruheindia.com as of November 2026, per piece:
- 2-inlet diverter full sets: ₹5,348; push-button ₹5,469; high-flow ₹7,598
- 3-inlet (5-way) full set: ₹6,738
- Flux 3-function full set: ₹19,095
- Aurora thermostatic diverters: ₹39,206 (3-Function, Chrome) to ₹76,056 (5-Function)
- Diverter bodies: ₹4,019 to ₹6,162
- Upper parts: ₹1,368 and ₹1,477
Warranty, Installation, Returns and Shipping
- Warranty: diverters up to 10-year (body 10 years, cartridge 5 years). See the Warranty T&C.
- Extended Warranty: available on complete diverter sets, on the product page.
- Home Installation: Ruhe fits the upper part after tiling, in serviceable cities; add it on the product page. The concealed body is fitted by your plumber during the plumbing work.
- Returns: 30-day returns on unused products, with free pickup.
- Shipping: ships in 1 working day; free shipping above ₹999 on prepaid orders.
Care
Wipe the handle and plate with mild soap and a soft cloth. No acid, bleach or scrubbing pads. If the flow drops in hard-water areas, the cartridge may need cleaning; you can book a paid service visit if you need help.